Power Source
|
220 V - 230 V AC, 50/60 Hz
24 V DC (M4 screw terminal) |
Rated Output
|
30 W
|
Power/Current Consumption
|
AC operation: 80 W (rated output), 37 W (EN60065),
24 V DC operation: 2.0 A (rated output), 1.0 A (EN60065) |
Frequency Response
|
50 Hz - 20 kHz (±3 dB)
|
Distortion
|
2 % or less at 1 kHz, rated power
|
Input
|
MIC 1: -60 dB(*1), 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack, DIN socket (5 pins) MIC 2 - 3: -60 dB(*1), 600 Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack AUX 1 (MOH): -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack AUX 2: -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack AUX 3: -20 dB(*1), 10 kΩ, unbalanced, combined type of XLR-3-31 and phone jack TEL(*2): -20 dB(*1), 10 kΩ, electronically-balanced, M3 screw terminal EMERGENCY: 0 dB(*1), 600 Ω, unbalanced, M3 screw terminal |
Output
|
REC: 0 dB(*1), 600 Ω, unbalanced, RCA pin jack
LINE 1, 2 (*3): 0 dB(*1), 600 Ω, unbalanced, RCA pin jack MOH: 0 dB(*1), 600 Ω, transformer balanced, M3 screw terminal SPEAKER SELECTOR: 2 zone, high impedance (100 V line/330 Ω), individual selector switch, M4 screw terminal DIRECT SPEAKER OUT: High impedance (100 V line/330 Ω), M4 screw terminal Low impedance (4 - 16 Ω), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time.) |
Phantom Power
|
ON or OFF for each MIC1 - 3 with switch setting (+17 V DC)
|
S/N Ratio (Band Pass : 20 Hz - 20 kHz)
|
100 dB or more (Master volume: min)
76 dB or more (Master volume: max) 60 dB or more (MIC 1 - MIC 3) 76 dB or more (AUX 1 - AUX 3) 90 dB or more (TEL) 96 dB or more (EMERGENCY) |
Tone Control
|
Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
|
Control Input
|
TEL: No-voltage make contact input, open voltage: 24 V DC, short-circuit: 5 mA or less,
M3 screw terminal EMERGENCY(*4): No-voltage make contact input, open voltage: 24 V DC, short-circuit: 10 mA or less, M3 screw terminal |
Control Output
|
Power remote: Open collector output, withstand voltage: 35 V DC,
control current: 50 mA or less, M3 screw terminal |
Chime
|
1-tone, 2-tone, or ascending 4-tone chime, or None selectable with switch setting,
activated at MIC 1's DIN or CONTROL TEL terminal. |
Indicator
|
5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED,
TEL LED |
Priority
|
EMERGENCY: Overrides other inputs
TEL: Overrides other inputs except 'EMERGENCY', ON/OFF selectable with switch setting MIC 1: Overrides other inputs except 'EMERGENCY & TEL', ON/OFF selectable with switch setting |
Operating Temperature
|
-10 ℃ to +40 ℃
|
Finish
|
Panel: ABS resin, black, hairline
Case: Steel plate, black |
Dimensions
|
420 (W) × 107.7 (H) × 367 (D) mm
|
Weight
|
8.1 kg
|
Accessory
|
Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
|
Option
|
Rack mounting bracket: MB-25B
Volume control cover: YA-920 Input transformer: IT-453A |
|
|
|
|