Specification
|
Power Source
|
220 - 240 V AC
|
Amplification System
|
Class D
|
Power Consumption
|
200 W (based on EN standards)
1200 W (rated output 4 Ω × 4) 800 W (rated output 8 Ω × 4) |
Input
|
4 circuits
10 kΩ CH 1 mode ON/OFF switch (ON: CH 1 to All ch |
Rated Output
|
4 channels: 250 W × 4 (4 Ω)
2 channels (BRIDGE): 500 W × 2 (8 Ω) M4 screw terminal |
Frequency Response
|
20 Hz - 20 kHz (±1 dB)
|
Total Harmonic Distortion
|
0.1 % (1 kHz)
0.3 % (20 Hz - 20 kHz) |
Protection Circuit
|
Protection against excessive current flow due to overload
short circuit temperature rise at power amp. heat sink (110 ℃ (230 ゜F) or more) temperature rise inside the unit (80 ℃ (176 ゜F) or more) |
S/N Ratio
|
100 dB (A-weighted)
|
Crosstalk
|
70 dB (A-weighted)
|
LED Indicator
|
Power (blue) × 1
Peak (red) × 4 |
Cooling
|
Forced air cooling
|
Operating Temperature
|
-10 ℃ to +40 ℃ (14 ゜F to 104 ゜F)
|
Operating Humidity
|
90 %RH or less (no condensation)
|
Finish
|
Panel: Aluminum
Case: Plated steel sheet |
Dimensions
|
482 (W) × 44 (H) × 401.8 (D) mm (18.98 × 1.73" × 15.82)
|
Weight
|
6.8 kg (14.99 lb)
|
Accessory
|
Power cord (2 m (6.56 ft)) …1
Tamper-proof cap …4 |
|
|
|
|